DIMENSIONS
& WEIGHTS ARE APPROXIMATE
(Apply
for certified drawings)
|
SERVICE RECOMMENDATIONS
These
strainers are used to remove foreign matter from pipe lines and
provide inexpensive protection to pumps, meters, valves, etc.
In appropriate material, the 125 series can be specified for drinking
water, cooling water, sea water, etc.
FEATURES
These
strainers have been designed for applications where easy maintenance
& large capacity straining are needed. Service time is minimal
because the cover is secured with quick opening, non-yoke type
knobs. Both the cover & the basket use O-ring seals, eliminating
the need to replace gaskets each time the strainer is serviced.
This, combined with the machined basket sheet, eliminates particle
bypass. With the appropriate wire mesh lining, these models can
be used to strain particles as small as five microns.
CONSTRUCTION
Cast
cover and body. All sizes feature an O-ring cover seal. Baskets
and O-rings are sealed in machined seats. Quick release knobs
are inserted molded with metal threads. A plugged NPT connection
is provided ("D"). Coatings are available on application.
Standard basket is .062 perf 304 ss Buna-N O-ring standard for
all models except stainless steel, which is supplied with a Viton
O-ring.
CAPACITY:
Minimum 6 to 1 open area ratio.
TESTING:
Shell test pressure= 1.5 times working pressure.
|
